![background image](http://html1.mh-extra.com/html/takeuchi/tl150/tl150_workshop-manual_3333853279.webp)
IV-133
HYDRAULIC UNITS
TRAVEL MOTOR
INSPECTION AND ADJUSTMENT
Use Limit for Parts
Part
Location
Criteria
Action
Planet gear
Gear tooth surface
No abnormal scratches, wear or flak-
ing on the tooth surface
Replace
Rolling surface of the
needle bearing
No abnormal scratches, wear or flak-
ing on the rolling surface
Replace
Needle bearing
Needle bearing surface
No abnormal scratches, wear or flak-
ing on the surface
Replace
Housing,
sun
gear, drive gear
Gear tooth surface
No abnormal scratches, wear or flak-
ing on the tooth surface
Replace
Thrust plate
Sliding surface
No abnormal scratches, wear or flak-
ing on the surface
Replace
O-ring
—
—
Replace
Shaft
Oil seal surface
No scratches or wear
Replace
Ball bearing
Sliding surface
No abnormal scratches, wear or flak-
ing on the ball or race
Replace
Oil seal
—
—
Replace
Swash plate
Surface of the sliding part
with the piston assembly
No abnormal scratches, wear or sei-
zure on the surface
Repair with a lap-
ping tool (#1000) or
replace
Cylinder block
Surface of the sliding part
with the valve plate
No abnormal scratches, wear or sei-
zure on the surface
Repair with a lapping
tool (#1000) or replace
the cylinder block and
the piston together
Piston assembly Surface of the sliding part
with the swash plate
No abnormal scratches, wear or sei-
zure on the surface
Valve plate
Surface of the sliding part
with the plunger
No abnormal scratches, wear or sei-
zure on the surface
Repair with a lap-
ping tool (#1000) or
replace
Valve body
Surface of the sliding part
with the plunger
No abnormal scratches, wear or sei-
zure on the surface
Replace the valve
body and the spool
together
Spool
Surface of the sliding part
with the base plate
No abnormal scratches, wear or sei-
zure on the surface
Center
disc,
friction disc
Disc thickness
Four center discs and three friction
discs are worn to 13.5 mm or less
Replace
Summary of Contents for TL150
