TAJIMA TEMX-C Series, User Manual

Page: 93 / 242

To trim thread
80
Chapter 5
PT10
2-5.
To add thread trimming code to the design and trim thread (Data Edit "Insert")
This function always executes automatic thread trimming at the same position by adding thread trimming
code to the design. A stitch will be inserted before the selected stitch No. When this operation is performed
in the middle of embroidery, data set will be canceled. If the stitch having long length is inserted, a design will
be displaced hereafter.
2-5-1.
Explanation on the screen
2-5-2.
How to operate
The following is an example that thread trimming code is added to 20th stitch.
(1)
To open screen
(2)
To select a design
The original design will be overwritten after editing. Back up design data according to
need.
1Data edit
Delete
1
2
3
4
5
6
7
8
9
10
0 0 Jump
8 4 Stitch
8 3 Stitch
11 5 Stitch
8 8 Stitch
1 13 Stitch
-11 2 Stitch
-12 -3 Stitch
-11 7 Stitch
-25 15 Stitch
Modify
Insert
Stitch No.
X data (Data to move the frame in
crosswise)
When a value is 8, the frame travel
amount is 0.8 mm.
Y data (Data to move the frame in
lengthwise)
When a value is 4, the frame travel
amount is 0.4 mm.
Function code (p.219)
It is the code to indicate the role of
the stitch.
!
CAUTION
1 Data Edit
TBF
3
******
****
***