TAJIMA TEMX-C Series, User Manual

Page: 82 / 242

Embroidery starts
69
1
2
3
4
5
6
7
8
9
10
11
Chapter 4
RR07
After that, restart the embroidery according to the following procedure.
(a) Pass the upper thread, or change the under thread (bobbin).
(b) Start the operation after performing frame back by several stitches.
[Head with thread breakage]
The machine restarts embroidery from the position where frame back stopped (1 in the figure
below). As a result, mend sewing will be performed at the position 2 without sewing due to
thread breakage.
[Head without thread breakage (In case of multi-head machine)]
The machine restarts embroidery from the position 3 next to where frame back started. This
example is for the case "All head sewing after frame back" is set as "0" (p.140).
Threader (accessory)
Position where frame back started
(position where the machine stopped)
Thread broken position
Frame back
section
1
2
Embroidery direction
Position where frame back started
(position where the machine stopped)
Frame back
section
3
Embroidery direction