97
Chapter 8 Appendix
8
Moving parts in arm
1.
Remove the caps from the screws at two
places on the cover on the right side.
2.
Use a Phillips screwdriver (6 × 100) to remove the
screws in two places and remove the side cover.
3.
Apply a few drops of oil at the locations shown in
the illustration below.
• Vicinity of lubrication hole on shaft: (a)
• Moving part of lever: (b)
• Gold colored bushing: (c)
4.
Once the lubrication is completed, replace the right side cover and fasten the
screws in both places using a Phillips screwdriver (6 × 100).
5.
Re-attach the caps over the screws.
The screw caps can be removed more easily if you
insert tweezers or other narrow-tipped objects into
the hole.
(a)
(b)
(c)
(c)
