35
Chapter 3 How to Perform Embroidery
3
3.
If you have determined, as the result of the trace, that there are no problems with
the embroidery position, tap
.
The Embroidery Start screen is displayed.
Three speeds are available: high speed, medium speed, and low speed. Select the speed that you
would like to use.
1.
Tap
on the Embroidery Start screen.
The Speed Setting screen is displayed.
2.
Select either [H], [M], or [L] as the speed.
• To embroider at high speed, 800 rpm: [H]
• To embroider at medium speed, 500 rpm: [M]
• To embroider at low speed, 250 rpm: [L]
3.
Tap .
You will be returned to the Embroidery Start screen.
If a start message has been set for the design, the start message screen is displayed.
3.2.6 Selecting the speed
The default setting is [H] (800 rpm)
The speed can also be changed when the machine is paused while an embroidery is in progress.
If a start message has been set for the design, tap [RESET] to close the start message screen. After
that, perform the operation.
A general estimate of the amount of time it will take to complete the embroidery is shown for
each speed button.
