88
Chapter 7 Using Optional Accessories
7
6.
Turn the drive ring to move the connecting
sashes right and left, so the screw holes in the
connecting sashes are lined up with the
positions of the screw holes in the moving part
(two places, at right and left).
7.
Insert the knobbed screws into the screw holes
in the movable part and fasten them.
1.
Install the mounting jig on a stable surface
such as a table or stand, and use the clamp to
fix it in place.
2.
Place the cap frame over the tubular part of the
cap frame gauge.
3.
Align the cutout portion of the cap frame with
the position of the guide on the gauge and push
in the cap frame.
Keep pushing in until the lock levers (two places) click
into place, and the cap frame is secured.
If the screw holes are not aligned, slightly loosen
the knobbed screws at the lower part (two places, at
right and left) set in step 2, and tighten them after
aligning the screw holes.
7.1.2 Positioning a cap on the cap frame
