TAJIMA SAI MDP-S0801C(200x300)S Operation Manual Download Page 92

Page: 92 / 110

Chapter 7 Using Optional Accessories

Pull the fabric downward so that the portion to
be embroidered is stretched out properly.

Smooth out the fabric of the cap, then secure it
by attaching clips to the clip holders (two
places).

10.

Press the lock levers (two places) on the
gauge, and then pull off the cap frame from
the gauge.

While turning the visor of the cap to the right so
it will not make contact with the machine, insert
the cap frame in the drive ring.

Adjust the direction of the cap frame so the
visor of the cap faces directly upwards.

7.1.3 Positioning the cap frame on the cap frame unit

Summary of Contents for SAI MDP-S0801C(200x300)S















































































































Search results

Summary of Contents for SAI MDP-S0801C(200x300)S

Reviews:

Related manuals for SAI MDP-S0801C(200x300)S

Brands by name

Popular brands

TAJIMA SAI MDP-S0801C(200x300)S, Operation Manual

Search results

Summary of Contents for SAI MDP-S0801C(200x300)S

Reviews:

Related manuals for SAI MDP-S0801C(200x300)S

Brands by name

Popular brands