All Modes --> Off
Monitor blanked when the system enters any
power saving mode.
3.6.9 Video Off Method
This field defines the video off features. The following options are available: Blank Screen, V/H
SYNC+Blank, DPMS support. The DPMS (Display Power Management System) features allow the BIOS
to control the video display card if it supports the DPMS feature.
3.6.10 MODEM Use IRQ
This item tells the Power Management BIOS which IRQ is assigned to the installed MODEM. Option
are NA, 3, 4, 5, 7, 9, 10 and 11.
3.6.11 Soft-off by PWRBTN
When set to "Delay 4 Sec.", the power button has a dual function where pressing less than 4 seconds will
place the system in sleep mode and shut down the system when the button is held more than 4 seconds.
"Instant-Off", the system will be shut down right away when the power button is pressed.
3.6.12 State After Power Failure
Off: When power returns after an AC power failure, the system's power is off. You must press the Power
button to power-on the system.
On: When power returns after an AC power failure, the system will automatically power-on.
Auto: When power returns after an AC power failure, the system will return to the state where you left
off before power failure occurs. If the system's power is off when AC power failure occurs, it will remain
off when power returns. If the system's power is on when AC power failure occurs, the system will
power-on when power returns.
3.6.13 Wake Up Events
CMOS Setup Utility - Copyright ( C ) 1984 - 2000 Award Software
Wake Up Events
VGA
OFF
Item Help
LPT & COM
LPT / COM
Menu Level >
HDD & FDD
ON
PCI Master
OFF
Wake up on LAN/Modem
Disabled
RTC Alarm Resume
Disabled
X Date (of Month)
0
X Resume Time (hh:mm:ss)
0 0 0
Primary INTR
ON
> IRQ Activity Monitoring
Press Enter
¯
®
¬
: Move Enter : Select +/-/PU/PD : Value F10 : Save ESC : Exit F1 : General Help
F5 : Previous Value F6 : Fail-Safe Defaults F7 : Optimized Defaults
3.6.14 VGA
When set to On, any event occurring at a VGA port will awaken a system which has been powered down.
3.6.15 LPT & COM
When set to On, any event occurring at a LPT (printer) / COM (serial) port will awaken a system which
has been powered down.
3.6.16 HDD & FDD
When set to On, any event occurring at a Hard Disk or floppy drive port will awaken a system which has
been powered down.
3.6.17 PCI Master
