If the setting is "Setup", the system will only require the password you activate CMOS Setup Utility.
3.13 Save & Exit Setup
When all the changes have been made, highlight "Save & Exit Setup" and press <Enter>. The message
below will appear:
Save to CMOS and Exit (Y/N)? N
Type "Y" and press <Enter>. The modifications you have made will be written into the CMOS memory, and
the system will reboot.
3.14 Exit Without Saving
When you do not want to save the changes you have made, highlight "Exit Without Saving" and press
<Enter>, The message below will appear:
Quit Without Saving (Y/N)? N
Type "Y" and press <Enter>. The system will reboot.
Chapter 4. Driver Installation
4.1 Sound Driver Installation
4.1.1 Windows 95 Installation
Please refer to the readme.txt file that in \VIA\686SOUND directory in the CD Driver Disk first then follow
the instruction to setup sound driver for Windows 95.
4.1.2 Windows 98 Installation
1.
Insert the CD Driver into the CD drive-enter the
\VIA\686SOUND
directory on the CD-ROM
and double-click SETUP.EXE.
2.
Follow the prompts to complete the installation.
3.
System will restart and automatically detect some devices.
4.
If the Insert Disk dialog is displayed, please insert the Windows 98 CD-ROM into the CD drive,
then click "OK" button.
5.
If system needs to copy some files (e.g., ksclock.ax, mspclock.sys or swmidi.sys), please type
D:\WIN98 to copy file then click " OK " button.
Note: D: is the drive where Windows 98 CD-
ROM has been inserted.
6.
You must restart your computer again to take new driver effect.
Note: If your Operation System is Windows 98 first edition, please make sure you have setup the MIDI
output. Please follow the below steps to setup MIDI instruments.
1.
Double click " Multimedia " icon from Start \ Setting \ Control Panel
2.
Select " MIDI " page and select " VIA FM Synthesis " from Single instrument field.
3.
Click " Apply " button then click " OK " button.
4.1.3 Windows 2000 Installation
1.
Insert the CD Driver into the CD drive-enter the
\VIA\686SOUND
directory on the CD-ROM
and double-click SETUP.EXE.
2.
Follow the prompts to complete the installation.
3.
System will restart and automatically detect some devices. Follow the prompts to complete the
installation.
4.
You must restart your computer again to take new driver effect.
4.1.4 Windows NT 4.0 Installation
1.
Install Service Pack 4 or later first.
2.
Insert the CD Driver into the CD drive-enter the
\VIA\686SOUND
directory on the CD-ROM
and double-click SETUP.EXE.
3.
Follow the prompts to complete the installation.
4.
Restart system.
