11
The speakers in the Diamond series are equipped
with the magnetic front logo badge. Your Diamond
speaker is delivered with the badge installed. To
remove the badge pull it gently forward. To install
the badge back gently attach it to the place from
where it was removed.
Note:
Make sure not to scratch the speaker during
removing / installing the badge.
Diamond - removable front logo badge
Final adjustments
After you have your speakers positioned in the room, correctly connected and your audio system
properly set up, you can start to do final adjustments.
Break-In
TAGA Harmony speakers sound great immediately after they are taken out of the carton. Start
listening to music at moderate volume levels to break in the speakers. The speakers will sound
even better after approximately 3-50 hours of play.
Sound
Start playing your favorite music or video. You should hear balanced audio reproduction across
the entire frequency spectrum. If not, check all wiring connections or consult your local TAGA
Harmony dealer. In stereo systems the amount of bass and the stereo-image quality will be
affected by a number of different factors, including your room’s size and shape, and the position of
the speakers in the room. Listen to a variety of music selections and note the bass level. If there is
too much bass, move the speakers away from nearby walls. If there is not enough bass move the
speakers closer to nearby walls. For a better stereo-image experiment with positioning speakers
relative to each other and relative to your listening position.
