manualshive.com logo in svg

Taga Harmony Audio-Video Series, Instruction Manual, Page: 3 / 12

Share
Download
Taga Harmony Audio-Video Series Instruction Manual Download Page 3

3

Contents

Unpacking the speakers   

 

 

 

 

3

Placement 

 

 

 

 

 

 

6

Wall-Mounting of Satellite (S), Surround (S), Center (C), 

 

LCR 

and 

LCRS 

speakers 

     9

 

Hooking up the wires 

 

 

 

 

 

9

Diamond - removable front logo badge 

 

 

 

11

Final 

adjustments 

      11

Unpacking the speakers

If you notice any damages in transportation, report it immediately to your dealer. 

Keep the speaker carton for future use.

Your speakers are delivered in the factory packaging (carton) and may be packed in a few 

different ways:

1. Floorstanding (F) speakers:  1 carton usually contains 1 piece of speaker. 

 

For certain floorstanding speakers 1 carton may contain 2 pieces – refer to the information on 

the packaging. 

2. Bookshelf (B) and Surround (S) speakers: 1 carton contains 2 pieces of speaker.

3. Center (C) speakers: 1 carton contains 1 piece of speaker.

4. LCR / LCRS speakers: 1 carton contains 1 piece of speaker.

5. 

Home Theatre packages:  

    5.0: 1 carton contains 5 pieces of speaker. 

 

    6.0: 1 carton contains 6 pieces of speaker.

 

    7.0: 1 carton contains 7 pieces of speaker.

Note:

 For detailed information about number of speakers refer to the information on the 

packaging.

Floorstanding (tower) Speakers (F):

All floorstanding speakers are supplied with spikes - depending on the series and model the 

spikes may be packed in the same packaging as the speakers or separately.

Depending on the series and model the speakers may be provided with factory bases(plinths) or 

feet and additional accessories for installing them - refer to a separate list of accessories which 

should be provided with your speaker or be available on www.TagaHarmony.com

Note: The installation instruction for bases(plinths) or feet is provided separately usually in 

the box with the bases(plinths) or feet.

Note:

 Some accessories may be packed with the speakers and some with the bases(plinths) or 

feet. Check with your local dealer for more details.

Floorstanding (F) speakers:  1 carton usually contains 1 piece of speaker. For certain 

floorstanding speakers 1 carton may contain 2 pieces – refer to the information on the packaging.

Summary of Contents for Audio-Video Series













Reviews:

No comments