4
Unpacking the speakers
When unpacking your speakers you can choose one of two installation options:
1)
with the base(plinth) or feet and spikes or with
2)
the spikes only.
If your speaker is provided with the the base(plinth) or feet TAGA Harmony recommends the first
option.
1. BASE(PLINTH) / FEET with SPIKES [refer to a separate installation instruction]
1 carton contains 1 piece of floorstanding speaker
To prevent damage to the speaker, install the base(plinth) / feet and the spikes while the speaker
is still in the carton.
Place the carton with the speaker on the floor in the upside down position and open it from the
bottom, remove the protective bag and install the base(plinth) / feet and the spikes.
1 carton contains 2 pieces of floorstanding speaker [including Home Theatre packages]
Remove the speakers from the carton and place them on a stable surface in a horizontal position
above the floor level.
Remove the protective bag from the bottom of the speakers and install the bases(plinth) / feet and
the spikes.
2. SPIKES only
1 carton contains 1 piece of floorstanding speaker
To prevent damage to the speaker, install the spikes while the speaker is still in the carton.
Place the carton with the speaker on the floor in the upside down position and open it from the
bottom, remove the protective bag.
Screw in the spikes into the threaded sockets located at the bottom side of the speaker (place the
speaker in the A1 or A2 position).
A1
A2
