5
FINAL STEP
Carefully turn the carton with the speaker upside down. When the speaker is securely placed on
the floor, remove the carton and internal packaging - your speaker is ready for placement in your
room
.
1 carton contains 2 pieces of floorstanding speaker [including Home Theatre packages]
Remove the speakers from the carton and place them on a stable surface in a horizontal position
above the floor level.
Remove the protective bag from the bottom of the speakers.
Screw in the spikes into the threaded sockets located at the bottom side of the speaker (place the
speaker in the A3 position).
A3
Unpacking the speakers
Certain speakers may be supplied with self-adhesive rubber pads. If you
plan to place your speakers on bookshelves, speaker stands and other
surfaces you may protect your speakers and placement surfaces by
installing the rubber pads to the bottom corners of your speakers.
FINAL STEP
Carefully turn the speaker upside down. When the speaker is securely placed on the floor, remove
the protective bag - your speaker is ready for placement in your room.
Note:
If your speaker is equipped with 2 adjoining threaded sockets at each speaker corner then
to provide better speaker stability the outer sockets are recommended for installing the spikes.
Note:
Certain speakers may be provided with additional rubber feet which can be used
interchangeably with the spikes.
Note:
Depending on the series and model the speakers may be provided with additional spike
accessories (like decorative rings etc.) - refer to a separate list of accessories which should be
provided with your speaker model or be available on www.TagaHarmony.com
Bookshelf (B), Satellite (S), Surround (S), LCR and LCRS Speakers and Home Theatre
packages:
Place the carton on the floor.
Open it and carefully take out the speaker / speakers.
Installing optional rubber pads
