77
programming the remote control
operating manual
---
---
erase a macro
function
erasing single
commands
To erase a macro function:
1. Simultaneously press the appropriate
REMOTE SELECTION
key (
av
or
sat
) and the
mute
key until the learning status LED
turns red.
2. Press the macro key (
m1
to
m4
or
standby
) you wish to
erase.
3. Press the
CH +
(or
CH -
) key. The learning status LED will
flash red twice then go off.
To erase a learnt command from a key:
1. Simultaneously press the
REMOTE SELECTION
key for the
appropriate device and the
ok
key until the status LED turns
yellow and the chosen
REMOTE SELECTION
key is lit.
2. Press the key for the function which you wish to erase. The
REMOTE SELECTION
LED will turn off and the status LED will
flash continuously yellow.
3. Press the
light
key. The status LED will flash green twice then
turn a constant yellow colour. The chosen
REMOTE
SELECTION
key LED will turn back on.
Repeat steps 2 and 3 to erase any other learnt commands for the
selected device.
4. To finish, simultaneously press and hold the
REMOTE
SELECTION
and
ok
keys. The
REMOTE SELECTION
key LED
will go out and the status LED will flash yellow twice then
go out.
cd
dvd
amp
av
R E M O T E S E L E C T I O N
sat
tv
vcr
ld
pause
play
skip
+
record
skip
eject
---
stop
ok
return
cancel
LFE
LFE
---
+
r
e
w
f
f
d
s
image
analog ------
dig ------
dig +
store
erase
station ------
functions
---
---
light
GRR00892.01-AV32R OPER 3.7x 6/14/02 9:35 AM Page 77
