73
programming the remote control
operating manual
The AV32R Remote comes pre-programmed and ready to use for
the following TAG McLaren Audio products:
• audio-visual processor AV32R
• five-channel amplifier 100x5R
• dvd player DVD32R
Other devices which are not pre-programmed to work with the
AV32R Remote will need to be ‘learnt’. To program the AV32R
Remote for other devices, you will need the original remote
control for the unit you wish to control.
Some devices (other than those listed above) may partially work
with the AV32R Remote as supplied. To check this, select the
desired unit using one of the
REMOTE SELECTION
keys and try
pressing a few of the keys. If the device responds as expected,
you may only need to edit the set-up for that unit by programming
one or two keys, as explained on the following pages, otherwise
you will need to program the Remote for all commands.
programming
the remote
control
cd
dvd
amp
av
R E M O T E S E L E C T I O N
sat
tv
vcr
ld
GRR00892.01-AV32R OPER 3.7x 6/14/02 9:35 AM Page 73
