16
source
component
connection
tv connection
A N A L O G I N P U T
5.1
BYPASS
SR
SL
SUB
C
R
L
TAPE
AUX
TUNER
SAT
VCR
TV
L
R
R
L
C O M P O S I T E
S – V I D E O
VCR-S
OUT
DVD-S
LD-S
+ OSD
SAT-S
VCR-C
OUT
TV-C
LD-C
+ OSD
SAT-C
serial
number
Double insulated
: When servicing, use only
identical replacement parts.
made in United Kingdom
DVD
CD
1
D I G I T A L I N P U T
C O A X I A L
O U T P U T
DAB
MD
SYNC
LD
BACK
RIGHT
BACK
LEFT
SURR.
2
(AC-3 RF)
1. Please refer to the
Set-up Manual
for details of all signal connections
2. Throughout both instruction manuals,
bold
print indicates the lettering that you
will find on the panels of your AV32R and the Remote Control. This manual
refers to the rear panel design introduced during winter 2001. If your AV32R
has the original rear panel layout then you will see small differences in the
graphics and labelling
You will need a source of audio-visual signals (such as our dvd
player DVD32R, a LaserDisc player or a video recorder) to feed
into your AV32R
(1)
. As an example: connect the digital audio
output of your DVD player (probably labelled ‘coaxial out’ or
‘coaxial digital out’) to the
DIGITAL INPUT DVD
(2)
socket using a
digital interconnect (such as our F3-10-DIG) or the analog audio
outputs of a VCR (probably labelled ‘audio out L & R’) to the
ANALOG INPUT VCR
sockets using an analog interconnect (such
as our F3-10-ANA).
Connect the video output of your source component (such as a
DVD player) to either the
COMPOSITE
video input
VCR-C
(you
can use our F3-10-VID interconnect for this purpose) or to the
S-VIDEO
input
VCR-S
(you can use our F3-10-SVID interconnect).
In most instances an S-Video connection will give you a better
picture quality than a composite connection. Please refer to the
instruction manual of your source component for further details.
Finally connect your TV (or projector) to the AV32R using either
the
COMOSD
socket or the
S-VIDEO +OSD
socket.
source and tv connection
operating manual
GRR00892.01-AV32R OPER 3.7x 6/14/02 9:34 AM Page 16
