‘error X’
‘input DC offset’
‘input overange’
You may from time to time see the following messages produced by the self-diagnostics
in the AV32R.
diagnostic messages
82
operating manual
This message indicates that there is an internal problem other
than those described here, where ‘X’ is a diagnostic code
number. The unit will mute should any problem of this type occur.
You will have to switch off your AV32R and re-start to clear this
problem. Should this problem persist, please report it to your
retailer or the TAG McLaren Audio Helpdesk.
This message indicates that there is excessive DC offset
(1)
on the
selected analog input. This is usually caused by a faulty source
component. The unit will mute should this occur. You should
contact the retailer of the equipment connected to the selected
input for advice.
This message indicates that the input level of your selected analog
input is too high. If this occurs too frequently, you should decrease
the input sensitivity of the selected input as described in the set-up
manual.
1. A DC offset is a continuously present constant voltage on your variable audio
signal
GRR00892.01-AV32R OPER 3.7x 6/14/02 9:35 AM Page 82
