Getting Started
Using Full System Startup
1-8
SPARCbook Portable Workstation User Guide
Using Full System Startup
Your SPARCbook can be booted in the same way as any conventional
desktop SPARC workstation running Solaris.
•
Use a full system startup if you have reconfigured your system’s
hardware in any way while it has been powered off. Save and
Resume may fail in cases where the system hardware has been
reconfigured.
•
Use a full system restart if, for any reason, you do not wish to use
the Save and Resume facility.
In cases where you have previously used Save to power off or if Resume
fails, a full system startup can be carried out as follows:
1.
If your system is powered on, press
Pause-O
to power off.
2.
Press the power on button or, if your system already has power
but is failing to Resume, press
Pause-R
.
3.
When the OpenBoot start-up screen is displayed, press
Pause-A
.
Tadpole S3 SPARCbook, keyboard present
ROM Rev 2.15 V1.00
32 MB memory installed, Serial #10683270
Ethernet address 0:0:83:a3:3:86, Host ID: Host ID:
80a30386
Initializing memory -
Type help for more information
ok
4.
At the OpenBoot prompt, type in the following commands:
ok create no-resume?
ok boot
S3UG4_Book Page 8 Friday, August 8, 1997 11:37 am
