Getting Started
Powering On for the First Time
1-6
SPARCbook Portable Workstation User Guide
Powering On for the First Time
To power your SPARCbook on, press the Power On button, as
illustrated in Figure 1-3.
As your SPARCbook powers on, a number of codes are displayed in the
status display and then, after some delay, the system configuration
screen is displayed.
Configuring your system is described in Chapter 2, “Initial System
Note
On a new system, the Power On button is only configured to power your
SPARCbook on. It has no effect while the SPARCbook is running. However, it
can be configured as a Save button using the NCE Save and Resume panel. See
Chapter 5, “Save and Resume” in this guide and “Save and Resume Panel” in
your
NCE User Guide
.
Figure 1-3 Powering On
Power ON
Button
S3UG4_Book Page 6 Friday, August 8, 1997 11:37 am
