SPARCbook Portable Workstation User Guide
15-15
System Upgrades
Upgrading the Main Memory
Enter partition id tag[unassigned]:<RETURN>
Enter partition permission flag [wu]:<RETURN>
Enter new starting cyl[1330]:1458
Enter partition size [262144b, 256c, 64.00mb]:512c
partition> 5
Part
Tag
Flag
Cylinders
Size
Blocks
5
opt
wm
1586 -11261 2.42GB
(9676/0/0) 4943872
Enter partition id tag[home]:<RETURN>
Enter partition permission flag [wm]:<RETURN>
Enter new starting cyl[2086]:1992
Enter partition size [4943872b, 9656c, 125.00mb]:9277
3.
When you have changed all of the the partitions, use the
label
command to write the new partition map to the disk:
partition>
label
4.
Quit from the partition and format menus:
partition> quit
format> quit
#
ò
Making and Checking New Filesystems
1.
To make and then check new filesystems for the changed
partitions, enter the following sequence of commands:
#
newfs /dev/rdsk/c0t0d0s1
#
fsck /dev/rdsk/c0t2d0s1
#
newfs /dev/rdsk/c0t0d0s3
#
fsck /dev/rdsk/c0t2d0s3
#
newfs /dev/rdsk/c0t0d0s4
#
fsck /dev/rdsk/c0t2d0s4
#
newfs /dev/rdsk/c0t0d0s5
#
fsck /dev/rdsk/c0t2d0s5
#
newfs /dev/rdsk/c0t0d0s6
#
fsck /dev/rdsk/c0t2d0s6
ò
Completing the Upgrade
The final step is to restore your backed up data to the new partitions. See
“Restoring Filesystems” on page 14-6.
When all of the above steps are complete, reboot your SPARCbook
from the internal hard disk by pressing
Pause-R
.
S3UG4_Book Page 15 Friday, August 8, 1997 11:37 am
