System Upgrades
Upgrading the Main Memory
15-6
SPARCbook Portable Workstation User Guide
ò
Fitting SIMMs
1.
Ensure that you are wearing the grounding wrist strap and that it
is grounded as described by the supplied documentation.
2.
Remove the first new SIMM from its antistatic bag.
3.
Hold the SIMM so that its contact edge points away from you
and the cut-out edge is on the right. Then, place the SIMM’s
contact edge against the SIMM connector (see Figure 15-2 views
C and D).
4.
With the contacts in position, gently press the SIMM downwards
until the latches click into place.
5.
Repeat steps 3 and 4 with the second SIMM.
Figure 15-2 Removing and Replacing the SIMMs
A
B
C
D
S3UG4_Book Page 6 Friday, August 8, 1997 11:37 am
