Tadpole COMET15, User Manual, Page: 83 / 116

DHCP
At the Enter MTU prompt, enter the MTU for your net-
work. You may need to contact your network administra-
tor for this information. The MTU is the size of the
largest datagram that your network can transmit. A value
of 1500 (the built-in default) is typical for most net-
works. Smaller values should only be used with the guid-
ance of your network administrator.
NOTE: The MTU must be between 576 and 1500, inclu-
sive.The MTU entry is optional. If you do not enter a value
and press <Enter>, the factory default of 1500 is left
unchanged.
After you have entered the information, you are prompt-
ed with a
Save Changes screen. Select Yes or No as
appropriate. If you select Yes, you are given a confirma-
tion screen stating "
Changes saved. "
Selecting No at the Save Changes screen or selecting Ok
at the
Changes saved
screen returns you to the Main
Menu.
When you exit the Main Menu via Exit or pressing the
Esc, the COMET will reset/reboot. The changes you
entered will take effect on the reset.
Chapter 4
Configuring
COMET
COMET User’s Guide 61
Configuring COMET
TCP/IP