Tadiran Telecom FlexSet 280S User Manual Download Page 182

Page: 182 / 253

Station Features

174

FlexSet 120S/280S User Guide

Transfer: Broker/Consultation/3-Way Conference Call

Transfer: 3 Way Conference

During a call you can use this feature to add another party to the call, creating a 3-Way Conference call.
1. During the call, press

[Xfer]

or the

XFER

fixed key.

2. Dial the third party dial number.
3. Wait for the third party to answer.
4. Press

[Xfr-3W]

[Xfer]

to connect all 3 parties. If your COS definition is defined as ALL, then you must press

[Xfr-3W]

again to establish the 3-Way call;

Press

[FrcRls]

to release the third party and to return to the original call (same as consultation call).

Other options after 3-Way call is established:

•

Press

[Xfer]

again to release the third party, and continue conversing with the original party.

•

Press the lit

[Source]

soft key to converse privately with the first (Source) party that you connected to. The

third (Destination) party is put on hold while you converse and the

[Dest]

soft key flashes.

•

Press the lit

[Dest]

soft key to converse privately with the second (Destination) party that you connected to.

The second (Source) party is put on hold while you converse and the

[Source]

soft key flashes.

•

Press the flashing

[Dest]

[Source]

soft key to switch between the Source and Destination parties.

•

Press

[Xfr-3W]

to reconnect all three parties again.

•

Press

[FrcRls]

to end the call (3-Way or 2-Way).

NOTE:

If you do not succeed in establishing a 3-Way call, your Transfer COS definition may be defined as
Transfer Broker or Transfer Consult.

Summary of Contents for FlexSet 280S






























































































































































































































































Search results

Summary of Contents for FlexSet 280S

Reviews:

Related manuals for FlexSet 280S

Brands by name

Popular brands

Tadiran Telecom FlexSet 280S, User Manual

Search results

Summary of Contents for FlexSet 280S

Reviews:

Related manuals for FlexSet 280S

Brands by name

Popular brands