Tadiran Telecom Aeonix TGW SIP-PRI Series, User Manual, Page: 51 / 61

TGWxE1 G a te w a y S e rie s U s e r M a n u a l
Ta d ira n Te le c o m 5 - 2 9
Table 5-19 Tones Configuration Parameters
Name Description
Country/region There are progress tone plans for several countries and regions which are pre-programmed in
gateways. Users may also specify the tone plan according to the national standard. Gateways
provide tone plan for the following countries and regions:
China; the United States; France; Italy; Germany; Mexico; Chile; Russia; Japan; South Korea; Hong
Kong; Taiwan; India; Sudan; Iran; Algeria; Pakistan; Philippines; Kazakhstan;
Dial Prompt tone of off-hook dialup
Busy Used for busy line prompt
Congestion Used for notification of call set up failure due to resource limit
Ring back The prompt tone sent to caller when ring
Disconnect Used for reminding the subscriber of off-hook and no dialup status of the phone
Here are examples that illustrate the various call-progress tones

350+440 (dial tone)
Indicates the dual–frequency tone consisting of 350 and 440 Hz

480+620/500,0/500 (busy)
Indicates the dual–frequency tone consisting of 480 and 620 Hz, repeated playing with 500
milliseconds on and 500 milliseconds off.
Note: 0/500 indicates 500 milliseconds mute.

440/300,0/10000,440/300,0/10000
Indicates 440 Hz single frequency tone, repeated twice in terms of 300 milliseconds on and 10
seconds off.

950/333,1400/333,1800/333,0/1000
Indicates repeated playing 333 milliseconds of 950 Hz, 333 milliseconds of 1400 Hz, 333 milliseconds
of 1800 Hz, and mute of 1 second.
5.6 Status
In case of full configurations, the TGWXE1 has one 4T1/E1 card, with four interfaces numbering
ISDN1 to ISDN4 from left to right. Users can view the ISDN calling state on the interface in usage.
The calling information about ISDN (1) is used as an example.
Click Status > ISDN1 tab to open the interface.