Tadiran Telecom Aeonix TGW SIP-PRI Series, User Manual, Page: 18 / 61

TGWxE1 G a te w a y S e rie s U s e r M a n u a l
3 - 2 Ta d ira n Te le c o m
Follow the steps to install the gateway:

Place the gateway on a shelf in the rack.

Slide it to a proper position along the guide rails.

Fix the rack-mount brackets to the rack posts with supplied Phillips screws. Make sure that the
gateway is in level position and securely fixed as shown in fowling figure.
Figure 3-2 Mount TGWXE1 to Rack
3.3 Installing Cables
3.3.1 Connecting Console Port
A CON should be provided by TGWXE1 to check errors of the device. Connect the CON with
computer’s RS232 serial ports, then local computers can interwork with the device through simulating
terminal program.
As to TGWXE1, RJ45 Plug is used. One port is applied for connecting CON, while the other is applied
for DB9 Adapter to insert serial ports of configuration terminal. CON Ratio: 115200.
Console Port cable installation procedure is as followed:
Step1 Choose a terminal (PC).
Step2 Power off the terminal and connect RS232 port with the Console port.
Figure 3-3 Cable of Connecting TGWXE1 CON