The Build
Please Note: Few pictures shown below are of different plane and for reference purpose only.
67. Glue the shown parts over the pre cut slots, for landing gear
assembly.
68. Glue the shown parts over the precut slots using the HV CA and
cure everything together using the kicker. Match the shown red area
with the precut slot in the EPP.
69. Install the undercarriage that we have prepared like shown in the
above image. Both wings are having different positioning of UC slots
with 3mm difference.
70. Make sure you have used the right orientation of the gear while
installing them.
71. Put a drop of HV CA over the joints and spray everything together. 72. Put a drop of HV CA over the joints and spray everything together.
67
69
71
68
70
72
FORWARD SLOT
BACKWARD SLOT
GEL GLUE (HV)
GEL GLUE (HV)
Page 17
