Translation of original operating instructions
10
9. Trouble Shooting
Below we have listed a number of possible causes and corresponding solutions in case the machine does not function
as it should:
•
The motor gets hot.
1. The ventilation slots in the motor are blocked with dirt:
−
Clean the ventilation slots.
2. The motor is defective:
−
Have your stone cutter repaired by your supplier.
•
The connected machine does not work.
1.
Interruption in the mains connection:
−
Check mains connection for fracture
2.
The switch is broken.
−
Have your stone cutter repaired by your supplier.
•
Sled loose / not secured.
1.
Sled is not set correctly.
−
Turn the sled around. You can set the rollers to any desired position using the eccentric screws. Ensure that
the rollers are all aligned at the same height to ensure that the sled is secured firmly.
Note:
Any other kind of repairs must only be done by authorized personnel.
10. Warranty
The present device was manufactured and inspected according to the latest methods. The seller warrants for faultless
material and workmanship in accordance with the legal regulations of the country in which the device was purchased.
The warranty period begins with the day of the purchase and is subject to the provisions below:
Within the period of warranty, all defects which are to be attributable to defective materials or manufacturing will be
eliminated free of charge. Any complaints are to be reported immediately upon their detection.
The warranty claim becomes void in the case of interventions undertaken by the purchaser or by third parties. Damage
resulting from improper handling or operation, incorrect setting-up or storage, inappropriate connection or installation or
Acts of God or other external influences are excluded from warranty.
Parts being subject to wear and tear, such as blade, are excluded from warranty. All parts were manufactured using
maximum care and high-quality materials and are designed for a long lifecycle. It should be understood, however, that
the wear and tear depends on the kind of use, the intensity of use and the internals of maintenance. Complying with the
installation and maintenance information contained in the present operating instructions will therefore considerably con-
tribute to a long lifecycle of these wearing parts.
In case of complaints, we reserve the option of repairing or replacing the defective parts or replace the entire device.
Replaced parts will pass into our property.
Claims for liquidated damages are excluded unless they are caused by willful acts or negligence on the side of the
manufacturer.
The warranty does not provide for any claims beyond those referred to above. The warranty claim has to be evidenced
by the purchaser in the form of the submission of the sales receipt. The present warranty commitment is valid in the
country in which the device was purchased.
Please note:
1. Should your device fail to function properly, please verify first whether an operating error or another cause is present
which cannot be attributed to a defect of the device.
2. In case you have to take or send in your defective device for repair, please be sure to enclose the following docu-
ments:
- Sales receipt (sales slip).
- A description of the occurring defect (a description as accurate as possible will expedite the repair work).
3. In case you have to take or send in your defective device for repair, please remove any attached parts which do not
belong to the original condition of the device. If any attached parts of this kind should be missing upon the return of the
device, we shall not be liable for them.
11. Service
In the case of warranty claims or malfunction, please contact your point of sale.
A current operating manual is available as required as a PDF file via e-mail:
Disposal and reuse of packaging material
Summary of Contents for Cross Tools CSC 350-2000 PRO
Page 15: ...Originalgebrauchsanweisung 13 ...
Page 27: ...Notizen notes note notas ...
