T.I.P. Cross Tools CSC 350-2000 PRO, Translation Of Original Operating Instructions

Page: 17 / 28

Translation of original operating instructions
2
2. Description oft the tool
1.
Handle
2. Blade
3. Sled
4. Longitudinal stop
5. Guide rail
6. Supporting leg
7. Water tank
8. Transport rollers
9. Transport handle
10. Fixing screw for angle adjustment
11. Fixing screw for depth limiter
12. Water hose
13. Water pump
14. Splash guard
15. Retaining screw for height limiter
16. Fixing screw for depth limiter
17. Water ball valve and distributor valve
18. ON / OFF switch
19. Handle
20. Water cooling of the diamond blade
21. Sled
3. Safety instructions for power tools
Please read these instructions carefully and get acquainted with the operating controls and the proper opera-
tion of the tool. We accept no responsibility for damages occurring due to non-observance of instructions and
regulations in this manual. Damages occurring due to non-observance of instructions and regulations in this
manual are not covered by guarantees.
Keep this manual in a safe place. If you pass on the tool, please also provide this manual.
The tool must not be used by children or people not acquainted with this manual. Chil-
dren should be supervised to ensure that they do not play with the tool. In some coun-
tries, local regulations might limit the age of possible users of the tool. These regulations
must be adhered to.
Unless supervised by persons responsible for their safety or introducing them to the use
of the tool, people with limited physical, sensory or mental capacities must not use the
tool.
Keep all safety instructions and operation instructions for future reference.
The term "power tool" used in the safety instructions refers to mains-operated power tools (with power cord) as well as
battery-powered tools (without power cord).