80
Transmission interruptions
occur when listening to
internet radio stations.
Cause 1:
The capacity of the internet radio station‘s server is at its limit.
Remedy:
Choose a different station.
Cause 2:
Network problems occurred.
Remedy:
Check your network (see above).
Some internet radio stations
cannot be received
Cause:
The internet radio station has been switched off, it transmits only at certain
hours of the day or it has changed its internet address.
Remedy:
Try to get information from the website of the station regarding transmission
hours an internet address (URL).
Try to establish a connection to the station at a later time.
Bad sound quality at certain
internet radio stations
Cause:
The station transmits with a low audio bandwidth (low bitrate).
Remedy:
Use stations transmitting at least at 128 kBit/s. This is the lowest recommended
bitrate for adequate sound quality. For good sound quality we recommend high
bitrates like 320 kBit/s
USB Storage device is not
recognised
or
Interruptions and / or jerky
reproduction of audio or
film material
Cause 1:
The storage device (especially USB hard discs without separate power supply)
draws more electrical current from the USB interface than is permitted by the
USB standard.
Remedy:
Only use USB storage devices that conform to the USB standard or use
storage devices with own power supplies.
Cause 2:
The storage device is not formatted with an appropriate file system.
Remedy:
The
K2 Blu
accepts storage devices with FAT16 or FAT32 file systems.
Note:
For big music archives we recommend to use a NAS (network attached
storage) device with an UPnP-AV server to which the
K2 Blu
will connect via
your home network.
Cause 3:
The data transfer rate of the memory unit is too low, or the memory unit is not
compatible with the
K2
’s USB port.
Remedy:
It is not possible to guarantee general compatibility with all devices on the
market due to the wide variety of USB memory media available.
If you encounter a persistent problem, we suggest that you try a different type
of USB memory unit.
Cause 4:
The USB memory unit is connected to the USB socket using a lead, rather than
directly.
Remedy:
Many USB extension leads are not suitable for the high data transfer rates
which occur during the Streaming process. Use only high-quality certified
cables, and ensure that the wire length is as short as possible (<50cm).
