11
Basic functions of the K2 Blu
This chapter describes the basic functions of the
K2 Blu
, which are always available, regardless of the currently
selected source.
Source switching
FM100
K2 Blu
/
/
/
The desired source is selected by pressing the source button
on the
front panel, repeatedly if necessary.
The source buttons on the FM100 remote control handset can be used to select
the desired listening source as follows:
Streaming Client
brief press on the
button
iPod
long press on the
button
Disc Player
brief press on the
button
TAPE input
brief press on the
button
Radio input
brief press on the
/
button
TV IN input
brief press on the
/
button
AUX IN input
press the
/
button repeatedly if necessary
DIG IN 1 input
press the
/
button repeatedly if necessary
DIG IN 2 input
press the
/
button repeatedly if necessary
Bluetooth input
press the
/
button repeatedly if necessary
Once you have switched the
K2 Blu
to the desired source, you can listen to
that source and also record the signal using the recorder outputs (TAPE OUT).
Internal sources, iPods connected to the
K2 Blu
and source devices connected
via the
E
LINK system, can be controlled using the FM100 remote control
handset or the front panel buttons, provided that they are selected as the
current listening source. For details on operating the
K2 Blu
’s integral source
devices please refer to the following chapters.
Volume control
FM100
K2 Blu
-
+
The volume of the
K2 Blu
can be adjusted in fine increments using the
/
buttons on the machine’s front panel, or
-
+
rocker on the
remote control handset. A brief press of one of the volume buttons increases or
reduces the volume level by one increment. Holding one of the volume buttons
pressed in changes the volume level continuously.
