14
Menu point
Adjustment range options:
Explanation:
Fader
Balance between loudspeaker
groups A and B
(The menu point only appears if
loudspeaker group B is connected,
and if two-room mode is switched
off in the System menu.)
-15 ... 0 ... +15
The Fader function is used to adjust the
balance between loudspeaker groups A and B,
if these are located in the same room.
If two-room mode is selected, this point is not
displayed, since in this mode the volume of
loudspeaker group B is controlled separately
using the external remote control receiver.
Center
(This menu point only appears if
a Centre loudspeaker is
connected to the system)
-15 ... 0 ... +15
Menu point for adjusting Centre volume.
We recommend a setting at which the Centre
speaker fills the acoustic gap in the middle
between the main loudspeakers, but is not
quite detectable as a separate sound source.
Subwoofer
(This menu point only appears if
an external sub-woofer is
connected to the system, and is
switched on in the System Confi-
guration menu / Loudspeaker
menu.)
-15 ... 0 ... +15
This Menu point is used to adjust the volume
level of the sub-woofer.
Adjust the volume of the sub-woofer to suit the
acoustic conditions in the listening room, and
the volume of the other channels.
Sound (sound fields)
The following-setup options are intended for adjusting the reproduction of the
K2 Blu
to suit the room acoustics.
Normal
Linear, musical tone setting with no
enhancements;
recommended for normally damped listening
rooms.
Dynamic
Linear sound image with good dynamics and
precision
Particularly recommended for rooms with
severe damping, and loudspeakers which tend
to emphasise bass.
Warm
If you prefer a relaxed sound image with
slightly subdued treble, select the sound field
option Warm.
Speech
This option improves speech clarity in spoken
word programmes, documentaries and sports
transmissions.
Cinema
Setting for use with cinema films, offering good
dialogue comprehensibility.
