SystemAir Danvent DV, Annex For The User Manual

Page: 25 / 76

Bilag 8—5
Measure the total length – AL of the unit – for example 5 metres between the 4982 and 5182 mm
mentioned in the table below.
AHU length
AL
Roof
length
RL
AHU length
AL
Roof
length
RL
AHU length
AL
Roof
length
RL
1670 – 1870 2070 4568 – 4768 4968 7466 – 7666 7866
1877 – 2077 2277 4775 – 4975 5175 7673 – 7873 8073
2084 – 2284 2484 4982 – 5182 5382 7880 – 8080 8280
2291 – 2491 2691 5189 – 5389 5589 8087 – 8287 8487
2498 – 2698 2898 5396 – 5596 5796 8294 – 8494 8694
2705 – 2905 3105 5603 – 5803 6003 8501 – 8701 8901
2912 – 3112 3312 5810 – 6010 6210 8708 – 8908 9108
3119 – 3319 3519 6017 – 6217 6417 8915 – 9115 9315
3326 – 3526 3726 6224 – 6424 6624 9122 – 9322 9522
3533 – 3733 3933 6431 – 6631 6831 9329 – 9529 9729
3740 – 3940 4140 6638 – 6838 7038 9536 – 9736 9936
3947 – 4147 4347 6845 – 7045 7245 9743 – 9943 10143
4154 – 4354 4554 7052 – 7252 7452
4361 ‐ 4561 4761 7259 ‐ 7459 7659
The mentioned length of roof – RL ‐ for this length of unit is 5382 mm (the delivered trapezoidal plates can
be combined to this length ‐ RL = 5382 mm). 5382 mm minus 5000 mm is 382 mm overhang for both ends,
and 382/2 mm = 191 mm is the overhang for each end. Place the trapezoidal roof plate F1 with the roof
overhang profile G1 on rail E with an overhang of 191 mm.