Synway SBO500 SBO Series User Manual Download Page 56

Page: 56 / 72

Synway Information Engineering Co., Ltd

explains the items shown in the above figure.

Item

Description

Centralized Manage

Select a management platform for the gateway to register.

Company Name

The company name used to register the gateway to Synway DCMS, only valid

when Synway DCMS is selected.

Gateway

Description

The description displayed on Synway DCMS after the gateway is registered to

Synway DCMS. giving an easy identification of the gateway in device grouping. This

item is only valid when Synway DCMS is selected.

Centralized

Management

Protocol

Sets the centralized management protocol, It only supports SNMP currently.

SNMP Version

Sets the version of SNMP, three options available: V1, V2 and V3, with the default

value of V2.

SNMP Server

Address

IP address of SNMP.

Monitoring Port

Monitoring Port for SNMP on the gateway.

Community String

Community string used for information acquisition.

Account

The account of SNMP, only valid when the SNMP version is set to V3.

Grade

The grade of SNMP, three options available: Neither authenticated nor encrypted,

Authenticated but not encrypted and Authenticated and encrypted, with the default

value of

Neither authenticated nor encrypted

. It is only valid when the SNMP

version is set to V3.

Authentication

Password

The authentication password required to enter when the item Grade is set to

Authenticated but not encrypted or Authenticated and encrypted.

Encryption

Password

The encryption password required to enter when the item Grade is set to

Authenticated and encrypted.

Working Status

Show the status of the connection between the gateway and centralized

management server. It is only valid when Synway DCMS is selected.

Note:

You can query OID (object identification trees) = .1.3.6.1.4.1.2021.51 at the SNMP Client to

obtain the signaling link status and the line synchronization information,

SMG SBO Series Gateway User Manual (Version 1.6.3)

Page 51

Summary of Contents for SBO500 SBO Series









































































Search results

Summary of Contents for SBO500 SBO Series

Reviews:

Related manuals for SBO500 SBO Series

Brands by name

Popular brands

Synway SBO500 SBO Series, User Manual

Search results

Summary of Contents for SBO500 SBO Series

Reviews:

Related manuals for SBO500 SBO Series

Brands by name

Popular brands