Synway SBO500 SBO Series User Manual Download Page 36

Page: 36 / 72

Synway Information Engineering Co., Ltd

Sub-item Description

Priority

Priority for choosing the CODEC in an SIP conversation. The

smaller the value is, the higher the priority will be.

CODEC

Seven optional CODECs are supported:

G711A

G711U

G729

G723

G722

AMR

and

iLBC

Packing Time

Time interval for packing an RTP packet, calculated by ms.

Bit Rate

The number of thousand bits (excluding the packet header) that

are conveyed per second.

By default, all of the seven CODECs are supported and ordered G711A, G711U,

G729, G723, G722, AMR and iLBC by priority from high to low. The CODECs set

here will be the default CODEC for the new added SIP trunks.

The packing time and bit rate supported by different CODECs are listed in the table

below. Those values in bold face are the default values.

COEDC

Packing Time (ms)

Bit Rate (kbps)

G711A

5 / 10 /

/ 30 / 40 / 50 / 60

G711U

5 / 10 /

/ 30 / 40 / 50 / 60

G729

20 8

G723

/ 60

5.3 /

6.3

G722

5 / 10 / 20 /

/ 40

AMR

/ 40 / 60

4.75 / 5.15 / 5.90 / 6.70 / 7.40 /

7.95 / 10.20 / 12.20

iLBC

/ 30 / 40 / 60

15.2

3.4 Route Settings

Route Settings is used to specify the routing rules for calls from IP

IP. See Figure 3-24.

Figure 3-24 Route Settings

3.4.1 Routing Parameters

Figure 3-25 Routing Parameters Configuration Interface

See Figure 3-25 for the routing parameters configuration interface. On this interface, you can set

SMG SBO Series Gateway User Manual (Version 1.6.3)

Page 31

Summary of Contents for SBO500 SBO Series









































































Search results

Summary of Contents for SBO500 SBO Series

Reviews:

Related manuals for SBO500 SBO Series

Brands by name

Popular brands

Synway SBO500 SBO Series, User Manual

Search results

Summary of Contents for SBO500 SBO Series

Reviews:

Related manuals for SBO500 SBO Series

Brands by name

Popular brands