manualshive.com logo in svg

Synway SBO500 SBO Series, User Manual

Share
Download
Synway SBO500 SBO Series User Manual Download Page 32

                                                           

Synway Information Engineering Co., Ltd

 

 

Figure 3-20 Add New SIP Trunk Group 

The table below explains the items shown in Figure 3-20. 

Item 

Description 

Index 

The unique index of each SIP trunk group, which is mainly used in the configuration 

of routing rules and number manipulation rules to correspond to SIP trunk groups. 

Description 

More information about each SIP trunk group. 

SIP Trunk Select 

Mode 

When the SIP trunk group receives a call, it will choose a SIP trunk based on the 

select mode set by this configuration item to ring. The optional values and their 

corresponding meanings are described in the table below. 

Option Description 

Increase 

Search for an idle SIP trunk in the ascending order of the 

SIP trunk number, starting from the minimum. 

Decrease 

Search for an idle SIP trunk in the descending order of 

the SIP trunk number, starting from the maximum. 

Cyclic Increase 

Provided SIP Trunk N is the available SIP trunk found last 

time. Search for an idle SIP trunk in the ascending order 

of the SIP trunk number, starting from SIP Trunk N+1. 

Cyclic Decrease 

Provided SIP Trunk N is the available SIP trunk found last 

time. Search for an idle SIP trunk in the descending order 

of the SIP trunk number, starting from SIP Trunk N-1. 

 

SIP Trunks 

The SIP trunks in the SIP trunk group. If the checkbox before a SIP trunk is grey, it 

indicates that the SIP trunk has been occupied. The ticked SIP trunks herein will be 

displayed in the column ‘SIP Trunks’ in Figure 3-21.  

After configuration, click 

Save

 to save the settings into the gateway or click 

Cancel

 to cancel the 

settings. See Figure 3-21 for the SIP Trunk Group Setting Interface. 

 

SMG SBO Series Gateway User Manual (Version 1.6.3)         

                                      Page 27 

Summary of Contents for SBO500 SBO Series









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands