21
20
The metaglene positioner is used to determine the optimal
metaglene position. The positioner plate is the same
diameter as the metaglene.
Assemble the positioner by inserting and screwing the
internal rod into the positioner handle (Figure 22).
posiTioNiNg ThE mETAgLENE
Then insert the hex head tip of the handle into the
corresponding plate hole (right or left depending on the
shoulder being operated upon) (Figure 23) and lock the
assembly by screwing the internal rod tight
(Figure 24).
Note: the handle is set at an angle of 20° to the plate
to ensure optimal visibility (Figure 24).
Figure 22
Figure 24
Figure 23
20˚
