伺服產品
/Servo Products
–
Hardware Manual of 30kW Servo Drive II (SPD-32B1-300)
Hardware Specification
–
8
Control
Method
3-phase full wave rectification, SVPWM
－
VVVF control
Regenerator
External
，
refer to the
Regenerator Selection
section
Encoder
Supported interfaces
：
Tamagawa, SYNNET, NIKON, FeeDAT
Other supported interface: Syntec
accelerometer
DO NOT support Syntec extended encoder modules
PC Interface
USB
Controller
Serial
Communicat
ion
Mechatrolink II, Mechatrolink III
I/O Signal
Digital Input
2 ports, function alterable
Digital
Output
1 port, function alterable
STO
Dual-channel Safety Torque Off switch (2I 1O)
Analog Input
1 port, (extended port, for KTY84)
Cooling
Method
Fan cooling
Environment
Temperature
0
℃
~ 55
℃
(If the surrounding temperature exceeds 45
℃
, implement forced
air circulation), storage: -20
～
65
℃
(non-freezing)
Humidity
Maximum 90% RH (non-condensing), storage: under 90%RH (non-
condensing)
Location
Indoors (avoid direct sunlight); keep away from oil, dust, and corrosive or
flammable gases
Altitude
Below 1000 m until sea level
Vibration
Maximum 5.9 m/s
2
Weight
9.27 kg
