Symphony SA-160, Flight Manual

Page: 232 / 338

A I R C R A F T
SA160
A I R C R A F T A I R C R A F T
Symphony
The COM flip-flop key is used to swap the active and standby
COM frequencies. Press and hold to select emergency channel
(121.500 MHz).
The VLOC flip-flop key is used to swap the active and standby
VLOC frequencies (i.e., make the selected standby frequency active).
(2) Right-hand Keys and Knobs
The range key allows selecting the desired map scale. Use the
up arrow side of the key to zoom out or the down arrow side to zoom
in.
The direct-to key allows entering a destination waypoint and
establishing a direct course to the selected destination.
The menu key displays a context-sensitive options list. The
options list allows making settings changes which relate to the
currently displayed page.
The clear key is used to erase information or cancel an entry.
Press and hold this key to immediately display the Default NAV Page.
The enter key is used to approve an operation or complete data
entry. It is also used to confirm information, such as during power
on.
The large right knob is used to select between the various Page
groups: NAV, WPT AUX or NRST. With the on-screen cursor
enabled, the large right knob allows moving the cursor about the
page.
The small right knob is used to select between the various
pages within one of the groups listed above. Press this knob
momentarily to display the on-screen cursor. The cursor allows
entering data and/or making a selection from a list of options.
SECTION 9
SUPPLEMENT 1
Feb 25, 2005 14 of 16