manualshive.com logo in svg

Symbol MiniScan MS-804FZY, Integration Manual

The Symbol MiniScan MS-804FZY is a compact and powerful barcode scanner perfect for any retail or warehouse environment. Easily integrate this device into your existing systems with the Integration Manual available for free download on manualshive.com. Increase efficiency and accuracy with this reliable scanning solution.

Share
Download
background image

v

Contents

Triggering Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-14
Aiming Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-15
Timeout Between Decodes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-16
Beep After Good Decode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-18
Transmit “No Read” Message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-19
Parameter Scanning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20
Linear Code Type Security Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-21
Bi-directional Redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-23

UPC/EAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-24

Enable/Disable UPC-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-24
Enable/Disable UPC-E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-25
Enable/Disable UPC-E1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-26
Enable/Disable EAN-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-27
Enable/Disable EAN-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-28
Enable/Disable Bookland EAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-29
Decode UPC/EAN Supplementals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-30
Decode UPC/EAN Supplemental Redundancy  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-32
Transmit UPC-A Check Digit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-33
Transmit UPC-E Check Digit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-34
Transmit UPC-E1 Check Digit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-35
UPC-A Preamble  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-36
UPC-E Preamble  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-37
UPC-E1 Preamble  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-38
Convert UPC-E to UPC-A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-39
Convert UPC-E1 to UPC-A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-40
EAN Zero Extend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-41
UPC/EAN Security Level  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-42
Linear UPC/EAN Decode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-44
UPC Half Block Stitching  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-45

Code 128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-46

Enable/Disable Code 128. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-46
Enable/Disable UCC/EAN-128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-47
Enable/Disable ISBT 128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-48
Lengths for Code 128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-48
Code 128 Decode Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-49
Code 128 Decode Performance Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-50

Code 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-51

Enable/Disable Code 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-51
Enable/Disable Trioptic Code 39  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-52
Convert Code 39 to Code 32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-53
Code 32 Prefix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-54
Set Lengths for Code 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-55
Code 39 Check Digit Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-57
Transmit Code 39 Check Digit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-58

Summary of Contents for MiniScan MS-804FZY

























































































































































































Reviews:

No comments

Related manuals for MiniScan MS-804FZY

Avery Dennison AP5.6 User And Service Manual preview
AP5.6
Brand: Avery Dennison Pages: 103
C Prox Quntek PN10 User Manual preview
Quntek PN10
Brand: C Prox Pages: 7
Jadak PHOTO RESEARCH TRU 8 Quick Reference Manual preview
PHOTO RESEARCH TRU 8
Brand: Jadak Pages: 9
Datalogic QuickScan QS6500BT Quick Reference Manual preview
QuickScan QS6500BT
Brand: Datalogic Pages: 16
Honeywell 3800r Technical Specifications preview
3800r
Brand: Honeywell Pages: 2
Sony Reader PRS600R Quick Start Manual preview
Reader PRS600R
Brand: Sony Pages: 2
Sony PRS300R Setup Manual preview
PRS300R
Brand: Sony Pages: 1
Sony PRS-950 - Reader Daily Edition&trade Specifications preview
PRS-950 - Reader Daily Edition&trade
Brand: Sony Pages: 2
Sony PSR-600 Quick Start Manual preview
PSR-600
Brand: Sony Pages: 8
Sony PRS-650RC - Reader Touch Edition&trade Specifications preview
PRS-650RC - Reader Touch Edition&trade
Brand: Sony Pages: 2
Sony PRS-900 - Reader Daily Edition PRS-900BC - Reader Daily Edition PRS-900 Specifications preview
PRS-900 - Reader Daily Edition PRS-900BC - Reader Daily Edition PRS-900
Brand: Sony Pages: 2
Sony Reader Quick Start Manual preview
Reader
Brand: Sony Pages: 14
Sony Reader PRS-T2 Service Manual preview
Reader PRS-T2
Brand: Sony Pages: 20
Sony PRS-950 - Reader Daily Edition&trade Service Manual preview
PRS-950 - Reader Daily Edition&trade
Brand: Sony Pages: 20
Sony PRS950BC User Manual preview
PRS950BC
Brand: Sony Pages: 43
Sony Reader PRS-T1 User Manual preview
Reader PRS-T1
Brand: Sony Pages: 51
Sony Reader PRS-T3 Series User Manual preview
Reader PRS-T3 Series
Brand: Sony Pages: 173
Sony PRS-950 - Reader Daily Edition&trade User Manual preview
PRS-950 - Reader Daily Edition&trade
Brand: Sony Pages: 180

Brands by name

Popular brands

Load more brands