Symbol MiniScan MS-804FZY, Integration Manual

Page: 71 / 184

7-11
Parameter Menus
Beeper Frequency Adjustment (MS-804FZY Only)
Parameter # F0h 91H
This parameter adjusts the frequency of the high beeper tone from the nominal 2500 Hz to
another frequency matching the resonances of the installation. It is programmable in
10 Hz increments from 1220 Hz to 3770 Hz.
To increase the frequency, scan the bar code below, then scan three numeric bar codes
beginning on
page 7-105 that correspond to the desired frequency adjustment divided by
10. For example, to set the frequency to 3000 Hz (an increase of 500 Hz), scan numeric
bar codes 0, 5, 0, corresponding to 50, or (500/10).
To decrease the frequency, scan the bar code below, then scan three numeric bar codes
beginning on
page 7-105 that correspond to the value (256 - desired adjustment/10). For
example, to set the frequency to 2000 Hz (a decrease of 500 Hz), scan numeric bar codes
2, 0, 6, corresponding to 206, or (256 - 500/10).
Beeper Frequency Adjustment