Symbol MiniScan MS-804FZY, Integration Manual

Page: 90 / 184

7-30
MS-804FZY and MS-904HS Integration Guide
Decode UPC/EAN Supplementals
Parameter # 10h
Supplementals are additionally appended characters (2 or 5) according to specific code
format conventions (e.g., UPC A+2, UPC E+2, EAN 8+2). Three options are available.
• If UPC/EAN with supplemental characters is selected, the scanner does not
decode UPC/EAN symbols without supplemental characters.
• If UPC/EAN without supplemental characters is selected, and the MS-
804FZY/MS-904HS is presented with a UPC/EAN plus supplemental symbol,
the scanner decodes the UPC/EAN and ignores the supplemental characters.
• If autodiscriminate is selected, scan Decode UPC/EAN Supplemental
Redundancy on page 7-32 , then select a value from the numeric bar codes
beginning on page 7-105 . A value of 5 or more is recommended.
• If Enable 378/379 Supplemental Mode is selected, the scanner identifies
supplementals for EAN-13 bar codes starting with a ‘378’ or ‘379’ prefix only. All
other UPC/EAN bar codes are decoded immediately and the supplemental
characters ignored.
• If Enable 978 Supplemental Mode is selected, the scanner identifies
supplementals for EAN-13 bar codes starting with a ‘978’ prefix only. All other UPC/
EAN bar codes are decoded immediately and the supplemental characters
ignored.
• If Enable Smart Supplemental Mode is selected, the scanner identifies
supplementals for EAN-13 bar codes starting with a ‘378’, ‘379’, or ‘978’ prefix only.
All other UPC/EAN bar codes are decoded immediately and the supplemental
characters ignored.
Note: To minimize the risk of invalid data transmission, we recommend
selecting whether to read or ignore supplemental characters.
Select the desired option by scanning one of the following bar codes.
Decode UPC/EAN With Supplementals
(0x01)