Symbol AP-51xx, Product Reference Manual, Page: 465 / 622

Command Line Interface Reference 8-139
AP51xx>admin(system)>set
Description:
Sets access point system parameters.
Syntax:
?
Example:
admin(system)> show
system name : AP51xx
system location : San Jose Engineering
admin email address : SJSharkey@symbol.com
system uptime : 0 days 4 hours 33 minutes
access point firmware version : 1.1.0.0-30D
country code : us
For information on configuring System Settings using the applet (GUI), see Configuring System Settings on page 4-2 . Refer to
Appendix A for information on the two-character country codes.
set name <name> Sets the access point system name to <name> (1 to 59 characters). The access
point does not allow intermediate space characters between characters within
the system name. For example, “AP51xx sales” must be changed to
“AP51xxsales” to be a valid system name.
loc <loc> Sets the access point system location to <loc> (1 to 59 characters).
email <email> Sets the access point admin email address to <email> (1 to 59 characters).
cc <code> Sets the access point country code using two-letters <code>.