manualshive.com logo in svg

Symbol AP-51xx, Product Reference Manual, Page: 384 / 622

Share
Download
Symbol AP-51xx Product Reference Manual Download Page 384

AP-51xx Access Point Product Reference Guide

8-58

8.3.2.3 Network WAN, Dynamic DNS Commands

AP51xx>admin(network.wan.dyndns)>

Description: 

Displays the Dynamic DNS submenu. The items available under this command include:

For an overview of the Dynamic DNS options available using the applet (GUI), see 

Configuring Dynamic DNS on page 5-25

. 

set

Sets Dynamic DNS parameters.

update

Sets key exchange parameters.

show

Shows the Dynamic DNS configuration.

..

Goes to the parent menu.

/

Goes to the root menu.

save

Saves the configuration to system flash.

quit

Quits the CLI. 

Summary of Contents for AP-51xx















































































































































































































































































































































































































































































































































































































































Reviews:

No comments