Symbol AP-51xx, Product Reference Manual, Page: 274 / 622

AP-51xx Access Point Product Reference Guide 6-60
6. Highlight a rogue AP and click the
Details
button to display a screen with device and
detection information specific to that rogue device. This information is helpful in
determining if a rogue AP should be moved to the Allowed APs table.
For more information on the displaying information on detected rogue APs, see Displaying
Rogue AP Details on page 6-60 .
7. To remove the Rogue AP entries displayed within the e Rogue APs field, click the Clear
Rogue AP List button.
Symbol only recommends clearing the list of Rogue APs when the devices displaying within
the list do not represent a threat to the access point managed network.
8. Click Apply to save any changes to the Active APs screen. Navigating away from the screen
without clicking Apply results in all changes to the screen being lost.
9. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on the Active APs screen to the last saved configuration.
10. Click Logout to securely exit the access point Symbol Access Point applet. A prompt
displays confirming the logout before the applet is closed.
6.13.1.1 Displaying Rogue AP Details
Before moving a rogue AP into the list of allowed APs within the Active APs screen, the device
address and rogue detection information for that AP should be evaluated.
To evaluate the properties of a rogue AP:
1. Select Network Configuration -> Wireless -> Rogue AP Detection -> Active APs from
the access point menu tree.
2. Highlight a target rogue AP from within Rogue APs table and click the
Details
button.
The
Detail
screen displays for the rogue AP.