Symbol AP-51xx, Product Reference Manual, Page: 297 / 622

Monitoring Statistics 7-7
3. Refer to the Received field to view data received over the access point LAN port.
LAN Interface Displays whether this particular LAN has been enabled as viable
subnet from within the LAN Configuration screen.
IP Address The Internet Protocol (IP) addresses for the
access point
LAN port.
Network Mask The first two sets of numbers specify the network domain, the next
set specifies the subset of hosts within a larger network. These
values help divide a network into subnetworks and simplify routing
and data transmission.
Ethernet Address The Media Access Control (MAC) address of the
access point
. The
MAC address is hard coded at the factory and cannot be changed.
For more information on how access point MAC addresses are
assigned, see
AP-51xx MAC Address Assignment on page 1-24 .
WLANs Connected The
WLANs Connected
table lists the WLANs using this LAN
(Either LAN1 or LAN2) as their LAN interface.
RX Packets RX packets are data packets received over the
access point
LAN
port. The number is a cumulative total since the LAN connection
was last enabled or the
access point
was last restarted. To begin
a new data collection, see Configuring System Settings on page 4-
2 .
RX Bytes RX bytes are bytes of information received over the LAN port. The
value is a cumulative total since the LAN connection was last
enabled or the
access point
was last restarted. To begin a new
data collection, see Configuring System Settings on page 4-2 .
RX Errors RX errors include dropped data packets, buffer overruns, and frame
errors on inbound traffic. The number of RX errors is a total of
RX
Dropped , RX Overruns and RX Carrier errors. Use this information
to determine performance quality of the current LAN connection.
RX Dropped The RX Dropped field displays the number of data packets failing
to reach the LAN port. If this number appears excessive, consider a
new connection to the device.