Note:
Although data is uploaded regularly, the Call Home system is passive. It
does not send alerts or notifications. The proxy settings let you set an intermediary
device between the Backup Exec 3600 Appliance and the Symantec Call Home
server.
Table 2-8
Hardware monitoring settings
Description
Item
Using a proxy server is disabled by default.
If the appliance environment has a proxy
server between the environment and
external Internet access, you must enable
the proxy settings on the appliance. The
proxy settings include both a proxy server
and a port. The proxy server must accept
https connections from the Symantec Call
Home server.
Proxy Server
Lets you enter the port number of the proxy
server.
Proxy Port
Enables the proxy server.
Enable Proxy
SNMP server settings
You can set SNMP server information.
See Settings > Configuration > SNMP Server page in the Backup Exec 3600 Appliance
Administrator's Guide.
Table 2-9
SNMP server settings
Description
Item
Lets you enter the SNMP (Simple Network
Management Protocol) Server host name.
You can enter a host name or an IP address
to define this computer. Notifications of the
alerts that are generated in the appliance
are sent using this SNMP server.
SNMP Server
Lets you enter the SNMP Server port
number.
If you do not enter anything for this variable,
the default port is 162, which is
pre-populated in the port field.
SNMP Port
Configuration
About post-configuration tasks and options
34
