■
NIC4 - Public Ethernet port (connecting the appliance to the customer's
production network)
■
NIC5 - Reserved for technical support only. Not for use by customers.
■
Serial port, not operational at this time.
Software overview
The Backup Exec 3600 Appliance is preloaded with the Backup Exec embedded
Total Protection suite license and the Essential Protection Suite license. A USB
2.0 drive is provided so that you can restore the original factory image, if needed.
The Backup Exec 3600 Appliance Web UI provides appliance management. The
Web UI monitors the appliance and provides hardware component information.
PowerShell CLI options let you make post-configuration changes, if needed.
PowerShell also lets you turn the appliance on and off. You must have Windows
PowerShell 2.0 on the PC to which the appliance is attached. More information
regarding PowerShell is found in the Symantec Backup Exec 3600 Administrator’s
Guide.
See “System requirements” on page 13.
System requirements
System requirements include the following items:
Table 1-3
System requirements
Description
Item
The Backup Exec 3600 Appliance supports
Internet Protocol version 4 (IPv4).
Internet Protocol version 4
13
Introduction
Software overview
