Warning:
Personal injury can occur from a hot power supply unit. Allow the power
supply unit to cool before servicing.
Before touching the blade or electronic components, make sure to wear an ESD
wrist strap. The strap prevents static discharge and ensures an ESD-safe
environment.
Touch a grounded metal object before removing the new power supply from the
antistatic bag.
Removing a power supply module
You can remove a power supply module.
To remove a power supply module
1
Press and hold the green safety lock down.
2
Pull the power supply module out of Backup Exec 3600 Appliance chassis.
Figure 3-2
Removing a power supply module
Replacing a power supply module
Note:
Ensure that the replacement power supply module has the same physical
appearance and the same connectors as the power supply that was removed.
To replace a power supply module
1
Press and hold the green safety latch.
2
Slide the new power supply module into the chassis slot.
3
Press firmly on the center of the power supply module to lock it in place.
43
Removing and replacing components
About removing and replacing power supply modules
