Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1, Manual

Page: 67 / 90

Table 5-10
System configuration editor settings
Description Setting Tab
You can select Leave existing for a
computer that is not stored in the
database. In this instance, the default
name that the Windows installation
generates is used. Computer Name Computer Name
This option lets you use the same
configuration for multiple computers.
Computers are named using a fixed
string and a value. Additionally, if you
use a name range with a static IP
address on the Network tab, the IP
address you specify is incremented as
well.
The fixed text appears before the
number range. If the append option is
selected, the text appears after the
number range.
The range is the number that you want
to start with. This string increments by
1 for each computer that receives the
configuration.
Name Range Computer Name
This tab lets you specify network
settings and provide a starting IP
address if using the Name Range
feature.
If you change an IP address from DHCP
to static, you need to supply the subnet
mask and gateway. Even if they are the
same as they were when you used
DHCP, you need to supply these
numbers. These values are not stored
when you use DHCP.
IP address options Network Adapters
Error 10010
If you try to deploy an image before that image is properly replicated to additional
site servers, you might see error 10010. This error can also occur when disk image
packages are not properly replicated before tasks are scheduled against them. In
either case, the failure is expected.
67 Imaging computers
Error 10010