Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1 Manual Download Page 22

Page: 22 / 90

Table 2-3

Deployment Solution predefined policies (continued)

Description

Policy name

Installs the site server components that
can offload most of the traffic and data
from the primary Notification Server.

When a managed computer is assigned
a deployment task, these components
instruct a task handler to load and
perform the task.

See

“Installing Deployment site server

components”

on page 25.

Deployment Site Server Components - Install

Uninstalls the site server components
that were previously installed.

Deployment Site Server Components - Uninstall

Downloads the upgraded site server
components to the computers that
don’t have the specified version.

Deployment Site Server Components - Upgrade

Uninstalling the Deployment plug-in

You can uninstall the Deployment plug-in by using the plug-in uninstall policy.
This policy is turned off by default.

To use this policy, turn off the install policy. Otherwise, the plug-in can be
reinstalled as soon as it is uninstalled.

See

“Installing the Deployment plug-in”

on page 19.

After the policy is turned on, the plug-in is uninstalled from all computers that
meet the criteria of the filter. If you change the Applied to option to Computers,
you can select individual computers.

See

“About Deployment Solution policies”

on page 20.

To uninstall the Deployment plug-in

In the Symantec Management Console, on the Settings menu, click
Agent/Plug-ins > All Agents/Plug-ins.

In the left pane, expand the Agents/Plug-ins > Deployment and Migration
folders.

Expand the folder for your operating system.

Click the uninstall policy.

Getting started with Deployment Solution

Uninstalling the Deployment plug-in

Summary of Contents for ALTIRIS DEPLOYMENT SOLUTION 7.1



























































































Search results

Summary of Contents for ALTIRIS DEPLOYMENT SOLUTION 7.1

Reviews:

Related manuals for ALTIRIS DEPLOYMENT SOLUTION 7.1

Brands by name

Popular brands

Symantec ALTIRIS DEPLOYMENT SOLUTION 7.1, Manual

Search results

Summary of Contents for ALTIRIS DEPLOYMENT SOLUTION 7.1

Reviews:

Related manuals for ALTIRIS DEPLOYMENT SOLUTION 7.1

Brands by name

Popular brands